Ebipụtara Circuit Board bụ isi nkuku nke ngwaahịa eletrọnịkị, ọ dị ezigbo mkpa maka ngwaahịa gị nwere ike ịgba ọsọ ogologo oge ma ọ bụ na ọ bụghị.Dị ka ọkachamara PCB na PCB Assembly emeputa, PCBFuture tinye a elu uru na àgwà nke sekit mbadamba.
PCBFuture na-amalite site na PCB Fabrication azụmahịa, wee gbasaa na PCB mgbakọ na components sourcing ọrụ, ugbu a aghọwo otu n'ime ndị kasị mma turnkey PCB mgbakọ emeputa.Anyị na-agbasi mbọ ike itinye ego na akụrụngwa dị elu maka teknụzụ ka mma, usoro ime ụlọ kachasị mma maka ịrụ ọrụ ka mma, na-enye ike ọrụ maka nka ka mma.
| Usoro | Ihe | Ike usoro | |
| Ozi isi | Ike mmepụta | Ọnụọgụ oyi akwa | 1-30 n'ígwé |
| Ụta na tụgharịa | 0.75% ọkọlọtọ, 0.5% elu | ||
| Min.Oke PCB emechara | 10 x 10mm (0.4 x 0.4") | ||
| Oke.Oke PCB emechara | 530 x 1000mm (20.9 x 47.24 ") | ||
| Multi-pịa maka kpuru ìsì/eli ozu vias | Ọtụtụ pịa okirikiri≤3 ugboro | ||
| Ọkpụrụkpụ osisi agwụla | 0.3 ~ 7.0mm (8 ~ 276mil) | ||
| Nkwenye ọkpụrụkpụ osisi agwụla | +/- 10% ọkọlọtọ, +/- 0.1mm dị elu | ||
| Ngwucha elu | HASL, HASL n'efu, ọla edo Flash, ENIG, plating gold siri ike, OSP, Tin imi, ọla ọcha imi, wdg. | ||
| Nhọrọ elu elu | ENIG+Mkpịsị aka ọla edo, Flash gold+mkpisiaka ọla edo | ||
| Ụdị ihe | FR4, Aluminom, CEM, Rogers, PTFE, Nelco, Polyimide / Polyester, wdg. | Ọzọkwa nwere ike ịzụta ihe dị ka arịrịọ | |
| Ọla kọpa | 1/3oz ~ 10oz | ||
| Ụdị Prepreg | FR4 Prepreg, LD-1080(HDI) | 106, 1080, 2116, 7628, wdg. | |
| Nnwale ntụkwasị obi | Bee ike | 7.8N/cm | |
| Ịma ama | 94V-0 | ||
| Mmetọ ionic | ≤1ug/cm² | ||
| Min.dielectric ọkpụrụkpụ | 0.075mm(3mil) | ||
| Nkwenye mgbochi | +/- 10%, min nwere ike ijikwa +/- 7% | ||
| Nbufe onyonyo dị n'ime & oyi akwa mpụta | Ike igwe | Igwe na-ehicha ihe | Ihe ọkpụrụkpụ: 0.11 ~ 3.2mm (4.33mil ~ 126mil) |
| Nha ihe: min.228 x 228mm (9 x 9") | |||
| Laminator, Exposer | Ihe ọkpụrụkpụ: 0.11 ~ 6.0mm (4.33 ~ 236mil) | ||
| Nha ihe: min 203 x 203mm(8 x 8"), max. 609.6 x 1200mm(24 x 30 ") | |||
| Etching Line | Ihe ọkpụrụkpụ: 0.11 ~ 6.0mm (4.33mil ~ 236mil) | ||
| Nha ihe: min.177 x 177mm (7 x 7) | |||
| Ikike Usoro oyi akwa ime | Min.obosara ahịrị dị n'ime / oghere | 0.075/0.075mm(3/3mil) | |
| Min.oghere site na onu onu ka conductive | 0.2mm (8mil) | ||
| Min.n'ime oyi akwa annular mgbanaka | 0.1mm (mil 4) | ||
| Min.mkpochapụ nkewa oyi akwa dị n'ime | 0.25mm (10mil) ọkọlọtọ, 0.2mm (8mil) elu | ||
| Min.oghere site n'ọnụ osisi ruo na-eduzi | 0.2mm (8mil) | ||
| Min.oghere dị n'etiti ala ọla kọpa | 0.127mm(5mil) | ||
| Ọkpụrụkpụ ọla kọpa enweghị nha nha maka isi dị n'ime | H/1oz, 1/2oz | ||
| Oke.okokụre ọkpụrụkpụ ọla kọpa | 10oz | ||
| Ike usoro oyi akwa | Min.Ogologo ahịrị dị n'èzí | 0.075/0.075mm(3/3mil) | |
| Min.oghere mpe mpe akwa nha | 0.3mm (12mil) | ||
| Ike usoro | Oke.oghere tent size | 5 x 3mm(196.8 x 118mil) | |
| Oke.tent oghere size | 4.5mm(177.2mil) | ||
| Min.obosara ala ụlọikwuu | 0.2mm (8mil) | ||
| Min.mgbanaka annular | 0.1mm (mil 4) | ||
| Min.Ọnụ ego BGA | 0.5mm (20mil) | ||
| AOI | Ike igwe | Orbotech SK-75 AOI | Ihe ọkpụrụkpụ: 0.05 ~ 6.0mm (2 ~ 236.2mil) |
| Nha ihe: max.597 ~ 597mm(23.5 x 23.5") | |||
| Orbotech Ves igwe | Ihe ọkpụrụkpụ: 0.05 ~ 6.0mm (2 ~ 236.2mil) | ||
| Nha ihe: max.597 ~ 597mm(23.5 x 23.5") | |||
| Ịkụ ala | Ike igwe | MT-CNC2600 Drill igwe | Ihe ọkpụrụkpụ: 0.11 ~ 6.0mm (4.33 ~ 236mil) |
| Nha ihe: max.470 ~ 660mm (18.5 x 26") | |||
| Min.nha nha: 0.2mm (8mil) | |||
| Ike usoro | Min.Multi-kụrụ akuakuzinwo bit size | 0.55mm (mil 21.6) | |
| Oke.akụkụ akụkụ (nha bọọdụ emechara nha VS Drill size) | 12:01 | ||
| Nkwenye ọnọdụ oghere (tụnyere CAD) | +/-3 nde | ||
| oghere Counterbore | PTH&NPTH, elu akụkụ 130°, n'elu dayameta <6.3mm | ||
| Min.oghere site na onu onu ka conductive | 0.2mm (8mil) | ||
| Oke.akuakuzinwo bit size | 6.5mm(256mil) | ||
| Min.Multi-kụrụ oghere nha | 0.45mm (mil 17.7) | ||
| Nkwenye nha nha oghere maka ọ dabara nke ọma | +/- 0.05mm(+/- 2mil) | ||
| Min.PTH oghere nha ndidi | +/- 0.15mm(+/- 6mil) | ||
| Min.NPTH oghere nha ndidi | +/-2mm(+/-78.7mil) | ||
| Min.oghere site na onu oghere ruo na-eduzi (vias kpuru ìsì) | 0.23mm(9mil) | ||
| Min.laser akuakuzinwo size | 0.1mm (+/- 4mil) | ||
| Countersink oghere akụkụ& dayameta | elu 82,90,120° | ||
| Usoro mmiri | Ike igwe | Panel&Pattern plating ahịrị | Ihe ọkpụrụkpụ: 0.2 ~ 7.0mm (8 ~ 276mil) |
| Nha ihe: max.610 x 762mm(24 x 30") | |||
| Maching deburring | Ihe ọkpụrụkpụ: 0.2 ~ 7.0mm (8 ~ 276mil) | ||
| Nha ihe: min.203 x 203mm (8" x 8") | |||
| Desmear Line | Ihe ọkpụrụkpụ: 0.2mm ~ 7.0mm (8 ~ 276mil) | ||
| Nha ihe: max.610 x 762mm(24 x 30") | |||
| Tin plating ahịrị | Ihe ọkpụrụkpụ: 0.2 ~ 3.2mm (8 ~ 126mil) | ||
| Nha ihe: max.610 x 762mm(24 x 30") | |||
| Ike usoro | Oghere mgbidi ọla kọpa ọkpụrụkpụ | nkezi 25um(1mil) ọkọlọtọ | |
| Ọkpụrụkpụ ọla kọpa emechara | ≥18um (0.7mil) | ||
| Obere ahịrị obosara maka akara etching | 0.2mm (8mil) | ||
| Oke ọla kọpa mechara maka ime&ime elu | 7oz | ||
| Ọkpụkpụ ọla kọpa dị iche iche | H/1oz, 1/2oz | ||
| Ihe mkpuchi mkpuchi & mkpuchi silk | Ike igwe | Igwe na-ehicha ihe | Ihe ọkpụrụkpụ: 0.5 ~ 7.0mm (20 ~ 276mil) |
| Nha ihe: min.228 x 228mm (9 x 9") | |||
| Ihe ngosi | Ihe ọkpụrụkpụ: 0.11 ~ 7.0mm (4.3 ~ 276mil) | ||
| Nha ihe: max.635 x 813mm(25 x 32") | |||
| Mepụta igwe | Ihe ọkpụrụkpụ: 0.11 ~ 7.0mm (4.3 ~ 276mil) | ||
| Nha ihe: min.101 x 127mm (4 x 5) | |||
| Agba | Agba nkpuchi solder | Green, matte akwụkwọ ndụ akwụkwọ ndụ, odo, nwa, acha anụnụ anụnụ, ọbara ọbara, ọcha | |
| Agba silkscreen | Ọcha, odo, oji, acha anụnụ anụnụ | ||
| Ikike nkpuchi solder | Min.solder mkpuchi oghere | 0.05mm(2mil) | |
| Oke.nkwụnye site size | 0.65mm(25.6mil) | ||
| Min.obosara maka mkpuchi ahịrị site na S/M | 0.05mm(2mil) | ||
| Min.solder mkpuchi akụkọ ifo obosara | 0.2mm (8mil) ọkọlọtọ, 0.17mm (7mil) dị elu | ||
| Min.solder nkpuchi ọkpụrụkpụ | 10um (0.4mil) | ||
| Solder mkpuchi ọkpụrụkpụ maka site tent | 10um (0.4mil) | ||
| Min.eriri mmanụ carbon obosara / oghere | 0.25/0.35mm(10/14mil) | ||
| Min.tracer nke carbon | 0.06mm (2.5mil) | ||
| Min.akara ahịrị mmanụ carbon | 0.3mm (12mil) | ||
| Min.oghere site na ụkpụrụ carbon ruo na paịlị | 0.25mm (10mil) | ||
| Min.obosara maka peelable mkpuchi mkpuchi mkpuchi / mpe mpe akwa | 0.15mm(6mil) | ||
| Min.solder nkpuchi akwa obosara | 0.1mm(4mil) | ||
| Ihe mkpuchi solder siri ike | 6H | ||
| Ike nkpuchi peelable | Min.oghere site na ụkpụrụ nkpuchi peelable ruo na mpe mpe akwa | 0.3mm (12mil) | |
| Oke.nha maka oghere ụlọikwuu peelable (site na mbipụta ihuenyo) | 2mm (7.8mil) | ||
| Oke.nha maka oghere nkpuchi peelable (site na mbipụta aluminom) | 4.5mm | ||
| Ọkpụrụkpụ nkpuchi peelable | 0.2 ~ 0.5mm (8 ~ 20mil) | ||
| Ikike silkscreen | Min.obosara ahịrị silkscreen | 0.11mm (4.5mil) | |
| Min.ogologo ahịrị silkscreen | 0.58mm (mil 23) | ||
| Min.oghere site na akụkọ ifo ruo na mpe mpe akwa | 0.17mm(7mil) | ||
| Emecha elu elu | Ikike imecha elu elu | Oke.ogologo mkpịsị aka ọla edo | 50mm(2") |
| ENIG | 3 ~ 5um (0.11 ~ 197mil) nickel, 0.025 ~ 0.1um (0.001 ~ 0.004mil) ọla edo | ||
| mkpịsị aka ọla edo | 3 ~ 5um (0.11 ~ 197mil) nickel, 0.25 ~ 1.5um (0.01 ~ 0.059mil) ọla edo | ||
| HASL | 0.4um(0.016mil) Sn/Pb | ||
| Igwe HASL | Ihe ọkpụrụkpụ: 0.6 ~ 4.0mm (23.6 ~ 157mil) | ||
| Nha ihe: 127 x 127mm ~ 508 x 635mm(5 x 5" ~ 20 x 25") | |||
| Ihe mkpuchi ọla edo siri ike | 1-5u" | ||
| Tin imikpu | 0.8 ~ 1.5um (0.03 ~ 0.059mil) Tin | ||
| Silver imikpu | 0.1 ~ 0.3um (0.004 ~ 0.012mil) Ag | ||
| OSP | 0.2 ~ 0.5um (0.008 ~ 0.02mil) | ||
| E-Nnwale | Ike igwe | Nnwale nyocha na-efe efe | Ihe ọkpụrụkpụ: 0.4 ~ 6.0mm (15.7 ~ 236mil) |
| Nha ihe: max.498 x 597mm (19.6 ~ 23.5") | |||
| Min.oghere site na mpempe ule ruo n'akụkụ osisi | 0.5mm (20mil) | ||
| Min.conductive iguzogide | 5Ω | ||
| Oke.mkpuchi mkpuchi | 250mΩ | ||
| Oke.ule voltaji | 500V | ||
| Min.ule mpe mpe akwa nha | 0.15mm(6mil) | ||
| Min.ule mpe mpe akwa ka oghere oghere | 0.25mm (10mil) | ||
| Oke.nwalee ugbu a | 200mA | ||
| Profaịlụ | Ike igwe | Ụdị profaịlụ | Ntugharị NC, V-cut, taabụ oghere, oghere stampụ |
| NC routing igwe | Ihe ọkpụrụkpụ: 0.05 ~ 7.0mm (2 ~ 276mil) | ||
| Nha ihe: max.546 x 648mm(21.5 x 25.5") | |||
| V-ịkpụ igwe | Ihe ọkpụrụkpụ: 0.6 ~ 3.0mm (23.6 ~ 118mil) | ||
| Oke ihe obosara maka V-cut: 457mm(18") | |||
| Ike usoro | Min.Nhazi bit size | 0.6mm (mil 23.6) | |
| Min.ndepụta ndidi | +/- 0.1mm(+/- 4mil) | ||
| Ụdị akụkụ V-cut | 20°, 30°, 45°, 60° | ||
| V-ịkpụ n'akuku ndidi | +/-5° | ||
| V-ịkpụ ndebanye ndidi | +/- 0.1mm(+/- 4mil) | ||
| Min.oghere mkpịsị aka ọla edo | +/- 0.15mm(+/- 6mil) | ||
| Bevelling n'akuku ndidi | +/-5° | ||
| Bevelling na-anọgide na-enwe ndidi | +/- 0.127mm(+/- 5mil) | ||
| Min.radius n'ime | 0.4mm (15.7mil) | ||
| Min.spacing si conductive ka ndepụta | 0.2mm (8mil) | ||
| Nlegide omimi Countersink/Counterbore | +/- 0.1mm(+/- 4mil) | ||